How Solar Panels Work: History, Science and Manufacturing

Learn who invented the solar panel, how it turns sunlight into electricity and how it is made, from Becquerel’s 1839 discovery to TOPCon and tandem cells.

Raja Awais Ali

11/20/20267 min read

How Solar Panels Work: History, Science and Manufacturing

A solar panel turns sunlight directly into electricity. It has no moving parts, burns no fuel and makes no noise. The underlying process is known in physics as the photovoltaic effect. Today, well over 2 terawatts (2,000 gigawatts) of solar capacity is installed worldwide, and new records are set almost every year. This did not happen overnight. The technology took more than 180 years to mature, and many scientists and engineers contributed along the way.

The story begins in 1839, when 19-year-old French physicist Edmond Becquerel placed two metal plates in a conducting liquid and noticed that a small electric current appeared when light fell on them. No theory existed to explain this, but the photovoltaic effect had been recorded for the first time. In 1873, Willoughby Smith observed that the element selenium changes its electrical conductivity when exposed to light. In 1876, William Grylls Adams and his student Richard Evans Day showed that selenium could generate electricity from light alone, proving that a solid material could convert light into power.

In 1883, Charles Fritts of New York built what is generally considered the first true solar cell by coating selenium with a thin layer of gold. Its efficiency was only about 1 percent, meaning roughly 99 percent of the incoming light was wasted. Fritts even installed such cells on a rooftop, but nobody at the time understood why they worked. In 1887, Heinrich Hertz observed that ultraviolet light knocks electrons out of metal. Albert Einstein explained this in 1905, proposing that light arrives in small packets called photons, each carrying a fixed amount of energy. He received the 1921 Nobel Prize in Physics for this work, not for his theory of relativity.

The path to a practical solar cell ran through silicon. In 1916, Polish scientist Jan Czochralski developed a method for growing a single crystal from molten silicon, and most solar wafers are still made this way. In 1941, Russell Ohl of Bell Labs found a p-n junction by accident in a silicon crystal. A crack divided the crystal into two regions of different purity, and when light hit it, a strong current flowed. That junction is the foundation of every modern solar cell.

The first modern solar cell was demonstrated by Bell Labs on 25 April 1954. Daryl Chapin, Calvin Fuller and Gerald Pearson built a silicon cell with an initial efficiency of about 4 percent, later improved to around 6 percent. This was far better than the earlier selenium cells, but the cost was prohibitive. At roughly 286 dollars per watt of capacity, it was not practical for everyday use on Earth. Its first major application came in space. On 17 March 1958, the United States launched the Vanguard 1 satellite, fitted with small solar cells producing about 1 watt in total. They kept working for around six years, long after the satellite’s chemical batteries had died. After that, solar power became standard on satellites.

Making solar affordable on Earth took the oil crisis of the 1970s. In 1973, Dr. Elliot Berman, working with Exxon’s backing, redesigned the cells and used cheaper materials, bringing the price down to roughly 20 dollars per watt. In 1977, the global average price was still about 76 dollars per watt. In the 1980s, Martin Green and his team at the University of New South Wales developed the PERC cell design, which remains a cornerstone of the industry. After 2000, Germany’s feed-in tariff policy created large-scale demand, and China’s mass manufacturing then pushed prices down sharply. Today, a panel costs roughly 0.10 to 0.15 dollars per watt, a drop of more than 99 percent since 1977.

How a Solar Panel Works

A panel contains many silicon cells. Silicon is a semiconductor, meaning it is neither a full conductor nor a full insulator. Its bandgap is about 1.1 electron-volts, which is the minimum energy a photon needs to free a bound electron. Each cell has two layers. One is doped with phosphorus, which adds extra electrons, and is called n-type. The other is doped with boron, which creates electron shortages known as holes, and is called p-type. Where the two layers meet, a p-n junction forms, creating a built-in electric field.

When sunlight strikes the cell, photons enter the silicon and free electrons. The junction’s electric field pushes electrons one way and holes the other. When an external wire connects the metal contacts on the top and bottom of the cell, electrons flow through it and return, and this flow is the electric current.

A single silicon cell produces only about 0.5 to 0.6 volts, which is very low, so cells are connected in series. A typical 60-cell panel has a working voltage of about 30 to 32 volts, and a 72-cell panel about 40 volts. Many newer panels use half-cut cells (108 or 120 half cells) to reduce losses. Panel ratings are given under Standard Test Conditions: 1,000 watts per square metre of sunlight, a cell temperature of 25°C and an AM1.5 light spectrum. Commercial panels today range from 400 to 600 watts and beyond.

Solar cells produce direct current (DC), while homes and the grid use alternating current (AC). An inverter converts one to the other, typically at 96 to 98 percent efficiency. Off-grid systems also need a battery and a charge controller. Heat is an important limitation. As a cell warms up, its voltage drops, and for most silicon panels, power falls by roughly 0.3 to 0.4 percent for every degree Celsius rise. This is why real-world output is often below the rated figure, even in strong sunlight.

How a Solar Panel Is Made

The raw material is quartz sand (silicon dioxide). It is heated with carbon in an electric arc furnace at about 2,000°C, producing metallurgical-grade silicon that is 98 to 99 percent pure. That is not pure enough for solar use. The silicon is reacted with hydrogen chloride to form trichlorosilane gas, and in the Siemens process, very pure polysilicon is deposited from this gas. Its purity exceeds 99.9999 percent (6N) and is often much higher. Polysilicon is the most expensive and energy-intensive step, and a very large share of it is produced in China, which accounts for more than 80 percent of the global solar supply chain.

The polysilicon is melted in a crucible at about 1,414°C. In the Czochralski method, a small seed crystal is dipped into the melt and slowly pulled upward while rotating, forming a large cylindrical single crystal called an ingot. This is monocrystalline silicon. For polycrystalline panels, the silicon is cooled in a mould, forming many small crystals. This costs less but gives slightly lower efficiency. The ingot is sliced with diamond-coated wire into wafers, which are now typically 130 to 180 microns thick. Common wafer sizes are 182 mm and 210 mm.

Each wafer then goes through several steps. First, a chemical etch roughens the surface into tiny pyramid-like structures that trap light instead of reflecting it away. Next, in a furnace at roughly 800 to 900°C, phosphorus is diffused into the wafer to form the p-n junction. A thin anti-reflective coating of silicon nitride is applied, which gives the cell its blue or black colour and cuts reflection from around 30 percent to just 2 to 3 percent. Finally, thin finger lines and busbars are screen-printed in silver paste, and the cell is heated to fix the contacts. Current cell technologies such as PERC, TOPCon and heterojunction (HJT) all build on this basic structure. They differ mainly in how they treat the surfaces so that electrons are less likely to recombine and be lost.

Finished cells are joined in series with thin metal ribbons to form strings. Lamination follows. From bottom to top, the stack consists of a backsheet or second glass layer, a transparent EVA plastic film, the cells, another EVA layer and, on top, tempered glass about 3.2 mm thick. The stack is heated to about 150°C and pressed under vacuum so that everything bonds into one solid unit. An aluminium frame, a junction box and bypass diodes are then added. The diodes ensure that if part of the panel falls in shade, the rest keeps producing power. Every panel is then flash-tested, where a brief, intense pulse of light measures its actual output.

Other Technologies and Efficiency Limits

Besides silicon, there are thin-film technologies such as cadmium telluride (CdTe) and CIGS, which deposit a very thin semiconductor layer on glass or metal. The American company First Solar is a major CdTe producer, and these panels typically reach 16 to 19 percent efficiency. Commercial silicon panels today achieve roughly 20 to 23 percent.

The theoretical limit for a single-junction cell, known as the Shockley-Queisser limit, is about 33.7 percent. Photons with too little energy pass through unused, and photons with too much energy lose the excess as heat. The best silicon cells in the lab have reached roughly 27 to 28 percent. To go beyond this limit, researchers are building tandem cells, which place a perovskite layer on top of silicon so that each layer captures a different part of the spectrum. Perovskite-silicon tandem cells have exceeded 34 percent in the lab, though durability and large-scale manufacturing remain challenges. In space and research settings, multi-junction concentrator cells have shown efficiencies above 47 percent, but they are extremely expensive.

Lifespan, Cost and Maintenance

A solar panel’s output declines very slowly, by about 0.4 to 0.5 percent per year. Most manufacturers offer performance warranties of 25 to 30 years, guaranteeing that the panel will still deliver roughly 80 to 87 percent of its original power at the end. A panel typically repays the energy used to make it within one to two years (its energy payback time), and then generates low-carbon electricity for the rest of its life.

Maintenance is minimal. Removing dust and dirt is usually enough, since soiling can cut output by 5 to 25 percent depending on location and climate. Recycling of old panels is also a growing industry, because the glass, aluminium and silicon can be recovered and reused.

Conclusion

From a small laboratory experiment, the solar panel has grown into a major part of the world’s electricity system. The journey from Becquerel’s metal plates to today’s 600-watt panels shows that real progress usually comes from science, material purity and manufacturing scale working together. The key question for the coming years is how quickly, and at what cost, newer technologies such as tandem cells can move from the lab to the factory.

Stay informed with the latest national and international news.

© 2026. All rights reserved.